Handlebars Reverse Components 31.8mm 25mm

" Specials " Handlebars Reverse Components Fat E-Element 800mm 31.8 mm OD 25mm Black / Grey E-Series specifically designed for Ebikes - Backsweep: 7 degrees - Upsweep: 5 degees The ELEMENT handlebars of the E-SERIES are characterized by their exceptional strength and stiffness. With our new ELEMENT BUTTING technology we are able to build our handlebars more stable than ever before with an excellent strength to weight ratio.

Reverse Components E‑Element 800mm Handlebar – 31.8mm Clamp / 40mm Rise (Black/Grey)

A high‑strength, e‑MTB‑rated handlebar built for riders who demand maximum control and durability. The Reverse E‑Element 800mm uses ELEMENT butted aluminium, carries the top‑tier E‑Safety Level 5 rating, and features a 40mm rise with a balanced 7°/5° sweep. Lightweight, stable, and fully certified for powerful e‑bikes.

Handlebars Reverse Components 35mm 255mm Rise

" Specials " Handlebars Reverse Components E-Element 800mm wide 35 mm OD 25mm Rise Black/Grey Specifically designed for Ebikes - Backsweep: 7 degrees - Upsweep: 5 degrees Based on real-time data we developed a revolutionary test procedure together with the EFBE Prüftechnik GmbH in Germany, where our Element handlebars are tested under the toughest conditions for safe use on e-bikes.

Stem Reverse Components Base 40mm 31.8mm

" Specials " Steering Stem Reverse Components Base 40mm Ø31.8mm Silver More Information

Stem Reverse Components Base 40mm 31.8mm

" Specials " Steering Stem Reverse Components Base 40mm 31.8mm Black Its stability and its short length and low height make this stem a popular dirt and slopestyle stem that you can rely on in every situation! - Length: 40 mm - Clamping diameter: 31.8 mm - Ø head tube: 1 1/8" - Angle: 0° - Stack height: 38 mm

Stem Reverse Components Base 40mm 31.8mm

" Specials " Stem Base 40mm 31.8mm Reverse Components Red

Its stability and its short length and low height make this stem a popular dirt and slopestyle stem that you can rely on in every situation!

- Length: 40 mm
- Clamping diameter: 31.8 mm
- Ø head tube: 1 1/8"
- Angle: 0°
- Stack height: 38 mm More Information

Stem Reverse Components Base 25.4mm

" Specials " Stem Base Reverse Components 25.4mm od with 40mm Length Black

Features
- Length: 40 mm
- Clamping diameter: 25.4 mm
- Ø head tube: 1 1/8"
- Angle: 0°
- Stack height: 39 mm
- Clamping platform: 40 mm More Information

Stem Reverse Components Base 31.8mm

" Specials Steering Stem Reverse Components Base 31.8mm OD 40mm Length
Orange

Its stability and its short length and low height make this stem a popular dirt and slopestyle stem that you can rely on in every situation!

- Length: 40 mm
- Clamping diameter: 31.8 mm
- Ø head tube: 1 1/8"
- Angle: 0°
- Stack height: 38 mm
- Clamping platform: 44 mm More Information

Stem Reverse Components Base 31.8mm

" Specials " Steering Stem Reverse Components Base 31.8mm with 40mm length Blue Its stability and its short length and low height make this stem a popular dirt and slopestyle stem that you can rely on in every situation! - Length: 40 mm - Clamping diameter: 31.8 mm - Ø head tube: 1 1/8" - Angle: 0° - Stack height: 38 mm - Clamping platform: 44 mm

Steering Stem XC 20° 90mm 31.8mm

" Specials " Steering Stem Reverse Components Cross Country 20° 90mm 3.,8mm Matt - Black

Thanks to the flip-flop system, it is also possible to mount the stem with both, a positive and a negative angle.

- Length: 90 mm
- Clamping diameter: 31.8 mm
- Ø head tube: 1 1/8"
- Angle: 20°
- Stack height: 37 mm
- Clamping platform: 40 mm
- Weight: 135 g (+/- 5% weight tolerance)
- Construction type: 3D forged
- Material: Aluminium 6061 T6 More Information

Steering Stem XC 20° 100mm 31.8mm Matt Black

" Specials "Steering Stem Reverse Components Cross Country 20° 31.8 mm 100mm Matt Black Thanks to the flip-flop system, it is also possible to mount the stem with both, a positive or negative angle.

Steering Stem eXC 6° 60mm 31.8mm

" Specials " Handlebar Stem Bicycle Reverse Components E-XC 6° 60mm Ø31,8mm Black / Grey
E-Series specifically designed for Ebikes

If you want to make the seating position more ergonomic on your e-bike and do not want to compromise on safety and quality, this cold-forged stem is the perfect choice!
The stems of the E-XC series have been tested and certified according to the "EFBE EPAC MTB-XC Tri-Test" and can be mounted on all types of E-bikes. More Information

Steering Stem XC 6° 80mm 31.8mm

" Specials " Steering Stem Reverse Components EMTB Cross Country 6° 31.8 mm 80mm Black / Grey

If you want to make the seating position more ergonomic on your e-bike and do not want to compromise on safety and quality, this cold-forged stem is the perfect choice!
The stems of the E-XC series have been tested and certified according to the "EFBE EPAC MTB-XC Tri-Test" and can be mounted on all types of E-bikes. More Information

Stem XC Reverse Components 6º 100mm 31.8mm

" Specials " Stem XC E Bike Reverse Components 6º 100mm 31.8mm Black and Grey If you want to make the seating position more ergonomic on your e-bike and do not want to compromise on safety and quality, this cold-forged stem is the perfect choice!

Stem XC 20° 80mm Ø31,8mm

" Specials " Stem Reverse Components MTB E-XC 20° 80mm 31.8mm Black / Grey
Specifically designed for Ebikes More Information

Stem XC 20º 100mm 31.8mm

" Specials " Steering Stem EMTB Cross Country Reverse Components 20º 31.8 mm 100mm Black and Grey If you want to make the seating position more ergonomic on your e-bike and do not want to compromise on safety and quality, this cold-forged stem is the perfect choice! Features - Length: 100 mm - Clamping diameter: Ø 31.8 mm - Angle: 6° - Stack height: 37 mm - Clamping platform: 40 mm - Ø head tube: 1 1/8" - Weight: 114 g (+/- 5% weight tolerance) - Construction type: 3D forged - Material: Aluminum 2014 T6

Stem Black-ONE Enduro 50mm 31.8mm

" Specials " Steering Stem Reverse Black-ONE Enduro 50mm 31.8mm Designed and approved for use on e-mtbs Black / Grey • Material: aluminium 2014-T6, anodized • Water transfer decals • For steerer: Ø 28.6 mm (1 1/8") • Handlebar clamp Ø: 31.8 mm • Length: 50 mm • Angle: 0° • Weight: approx. 144 g

Stem Black-ONE Enduro 50mm 31.8mm

" Specials " Steering Stem Reverse Black-ONE Enduro 50mm Ø31.8mm Black / Stealth

Details:
• Material: aluminium 2014-T6, anodized
• Water transfer decals
• For steerer: Ø 28.6 mm (1 1/8")
• Handlebar clamp Ø: 31.8 mm
• Length: 50 mm
• Angle: 0°
• Weight: approx. 144 g
• Black/stealth More Information

Stem Reverse Youngstar 35mm Ø31.8mm

Steering Stem Reverse Components Youngstar 35mm Ø31.8mm Black

Stem Black One D2 35mm 31.8/Ø35mm Blk/Org

" Specials " Stem Black One D2 35mm Reverse Ø31.8 & Ø35mm Black / Fox Orange
Length: 35 mm, Clamping diameter: Ø 31.8 mm & Ø 35.0 mm, Angle: 8°, Stack height: 40 mm, Clamping platform: 50 mm, Ø head tube: 1 1/8" More Information

Stem Black One D2 35mm Reverse 31.8 & 35mm

Stem Black One D2 35mm Reverse Components for 31.8 & 35mm Handlebars
Length: 35 mm, Clamping diameter: Ø 31.8 mm & Ø 35.0 mm, Angle: 8°, Stack height: 40 mm, Clamping platform: 50 mm, Ø head tube: 1 1/8" More Information

Stem Black One D2 35mm Reverse Black/White

" Specials " Stem Black One D2 35mm Reverse Black/White fits 31.8 or 35mm Handlebars
Length: 35 mm, Clamping diameter: Ø 31.8 mm & Ø 35.0 mm, Angle: 8°, Stack height: 40 mm, Clamping platform: 50 mm, Ø head tube: 1 1/8" More Information

Handlebars Reverse Components 31.8mm 40mm

" Specials " Handlebars Reverse Components Fatbar Tapered E-Element 740mm 31.8mm 40mm rise Black / Grey E-Series specifically designed for Ebikes

Handlebars EMTB Reverse Components 31.8mm

" Specials " Handlebars Reverse Components Fatbar Tapered E-Element 740mm 31.8mm / 25mm Black / Grey E-Series specifically designed for Ebikes More Information

Handlebar Reverse Bike Fatbar Base 31.8mm 18mm

Handlebars Reverse Components Bicycle Fatbar Tapered Base 790mm Ø31.8mm / 18mm Rise Black / Stealth

Handlebar Reverse Bike Fatbar Base 31.8mm 35mm

Handlebars Reverse Components Bike Fatbar Base 790mm Wide Bars Ø31.8mm / 35mm Rise Black Stealth Width: 790 mm, Ø: 31.8.0 mm, Rise: 18 mm, Backsweep: 7 degree, Upsweep: 5°, Weight: 346 g (+/- 5% weight tolerance), Material: Aluminium 7075 (double butted)

Handlebar Reverse Deviant 730mm 31,8mm 76mm

Handlebars Aluminium Deviant 730mm Ø31,8mm/76mm Rise Reverse Components Black White

Handlebar Reverse MTB Youngstar 31.8mm 22mm

Handlebars Mountain Bike Reverse Components Youngstar 560mm wide bars Ø31.8mm / 22mm Rise Black This fits well for riders under 12 years old or approx. 130-150 cm in height.

Handlebars MTB 31.8mm 25mm rise reverse Components

" Specials '' Handlebars Reverse Components Fatbar Lukas Knopf Signature Black 31.8 mm / Rise: 25mm 770 mm wide / Upsweep: 4° / Backsweep: 9° Aluminium 7075 (double butted) The design was developed together with Lukas and adapted to his wishes.Of course you will find his philosophy - "Life is short - stunt it" - also on the handlebars.

Stem Reverse Black-ONE D-2 35mm Titanium Black

" Specials " Stem Black-ONE D-2 35mm Reverse Components Aluminium with Titanium bolts Black

Stem Reverse Components Black-ONE 35mm 31,8 & 35mm

" Special " Stem E-Black-ONE D-2 35mm 31.8 & 35 mm Reverse Components Black Grey

The Black One D-2 stem builds on the success of our flagship Black One Enduro stem and brings in the ability to run both 31.8mm and 35mm handlebars with one stem.

Handlebars MTB Nico Vink 31.8mm 18mm

" Clearance Specials " Handlebar Reverse Components Mountain Bike Fatbar Nico Vink 810mm wide bars Black / Copper
Width: 810 mm, Ø: 31.8 mm, Rise: 18 mm, Upsweep: 5°, Backsweep: 7°, Weight: 390 g (+/- 5% weight tolerance), Material: Aluminium 7075 (double butted) More Information

Handlebar Reverse Bike Fatbar Vink 31.8mm 35mm

" Specials " Handlebars Reverse Components Bike Fatbar Nico Vink signature Black / Copper
Width: 810 mm, Ø: 31.8 mm, Rise: 35 mm, Upsweep: 5°, Backsweep: 7°, Weight: 390 g (+/- 5% weight tolerance), Material: Aluminium 7075 (double butted) More Information

Handlebars MTB Nico Vink Ø31.8mm 48mm Rise

A bombproof 810mm aluminium handlebar built to Nico Vink’s exact specifications. Featuring a 48mm rise, 31.8mm clamp, and reinforced wall thickness for extreme durability. Trusted at Rampage, Darkfest, and the world’s biggest freeride lines.

Stem Reverse Black-ONE D-2 35mm Titanium Silver

Stem Black-ONE D-2 35mm Titanium Reverse Components Silver

Stem Reverse Components Black-One 50mm 31.8 & 35mm

" Specials " Stem Black-One D-2 50mm 31.8 & 35mm Reverse Components Black Fox Orange

The Black One D-2 stem builds on the success of our flagship Black One Enduro stem and brings in the ability to run both 31.8mm and Ø5mm handlebars with one stem.

Stem Reverse Components D-2 31.8 & 35mm

" specials " Steering Stem Reverse Components Black One D-2 50mm For 31.8 & 35 mm Handlebars Reverse Black

The special designed shim allows the use of Ø31.8mm bars and when removed, it works as an Ø35mm stem. The shim provides a wide, smooth clamping area which is ideal for use with carbon bars. More Information

Stem Reverse Components Black-One 50mm 31.8 & 35mm

" Specials " Black One Stem Enduro Reverse Components 31.8 and 35mm Black / Grey

The Black One D-2 stem builds on the success of our flagship Black One Enduro stem and brings in the ability to run both 31.8mm and 35mm handlebars with one stem.

Stem Reverse Black-One D-2 50mm 31,8 & 35mm

Stem Black-One D-2 50mm Ø31,8 & Ø35mm Reverse Components Black White

Stem Reverse Black-One D-2 50mm 31,8 & 35mm

Stem Black-One D-2 50mm Ø31,8 & Ø35mm Reverse Components Black Light Blue