Stem E-Black One Enduro Reverse Ø31.8 & Ø35mm
01590
E-Black One Enduro stem Reverse Components
Length: 35 mm, 50 …
The stem for e-bikers
Few developments have had a similar impact on mountain bike sports as e-bikes. The e-bike has steered an entire industry into completely new paths! However, new demands are placed not only on the bicycle frame, but also on the components installed. Ever higher loads have to be absorbed by the components, because the frequency of trips with an e-bike is significantly higher than without a motor. After-work laps that were completed once in the pre-e-bike era are now run three times with motor support. That is why the cockpits of modern e-bikes have to be able to withstand more than on conventional bikes. With Reverse Stems of the E-Series you have reacted exactly to this development! The E-Black One Enduro stem was tested in the EFBE test laboratory according to the "EFBE EPAC MTB-GR Tri-Test", which is one of the toughest test procedures worldwide, and passed all stresses without problems! Tested and certified in Germany, this stem can be used by anyone without hesitation E-bike are built and convinces with its design and stability!
Length: 35 mm, 50 mm
Handlebar clamp: Ø 31.8 mm, 35.0 mm
Angle: 8 °
Height: 40mm
Clamping width: 50 mm
Ø head tube: 1 1/8
Weight: 127 g (+/- 5% weight tolerance)
Execution: CNC manufactured
Material: aluminum 6061 T6
E-safety level: Category 5 (maximum)
EFBE E-MTB Tri Test (EPAC MTB-GR) certified
Micro adjustment lines: for better orientation when aligning the handlebars
Product Fitment
| Make | Model | Year | Capacity |
|---|---|---|---|
| No fitment information available | |||